Public Water System: Claverack Water District

MyTapWater.org's tap water quality report is the compilation of data collected from federal, state, and local government agencies, most prominently the EPA. We strive to populate the report with the latest data concerning water contaminants, lead and copper levels, and water quality violations. We only collect drinking water data from public water systems.

PWS Service Information
PWS ID: NY1030223
Type: Community water system
EPA Region: 02
Primary Source: Ground water purchased
Population Served: 200
Contact Information
CLAVERACK WATER DISTRICT
CLAVERACK WATER DISTRICT
CLAVERACK WATER DISTRICT
P.O. BOX V
MELLENVILLE, NY 12544

This public water system services 1 zip code in 1 municipality in 1 county.

We could not find test result data for Claverack Water District.
However, this area is serviced by 63 or more other public water systems. Check your water bill to see which specific system applies. Here is a list of related systems:

See 53 more related public water systems »

Summary Results


A summary view of the the times a water contaminant was tested and found to exceed the level set by the EPA (the MCL).

We couldn't find any records of contaminants exceeding the regulated limits in your water.

Other Water Contaminants Tested


The following contaminants were tested and within national EPA guidelines.

The last mile of pipe makes a big difference, learn more about testing your water.

We couldn't find any records of contaminants in your water.

Lead and Copper Data


Lead and copper are recorded separately from other contaminants because of the Lead and Copper Rule. As with all other results, these are the findings at the water supply. Lead and copper can be — and often are — added to drinking water in between the water facility and a tap.

Sample ID Contaminant Sampling Start Date Sampling End Date Result
NY119991 lead 2016-01-01 2018-12-31 0.001mg/L
NY128099 lead 2015-01-01 2017-12-31 0.004mg/L
NY109676 lead 2013-01-01 2015-12-31 0.002mg/L
NY101116 lead 2012-01-01 2014-12-31 0.004mg/L
NY92210 lead 2013-01-01 2013-12-31 0.002mg/L
NY76162 lead 2011-01-01 2013-12-31 0.005mg/L
NY84148 lead 2012-07-01 2012-12-31 0.001mg/L
NY64576 lead 2010-07-01 2010-12-31 0.006mg/L
NY61840 lead 2009-01-01 2009-06-30 0.001mg/L
NY52181 lead 2008-01-01 2008-06-30 0.002mg/L

Violations


Known violations of the Safe Drinking Water Act as recorded by the EPA.

Compliance Dates Rule Violation Type Contaminant Name Status
2015-07-01 - 2015-07-31 Total Coliform Rule Monitoring, Routine Major (TCR) Coliform (TCR) Returned to Compliance
2015-06-01 - 2015-06-30 Total Coliform Rule Monitoring, Routine Major (TCR) Coliform (TCR) Returned to Compliance
2015-03-01 - 2015-03-31 Total Coliform Rule Monitoring, Routine Major (TCR) Coliform (TCR) Returned to Compliance
2012-09-01 - 2012-09-30 Total Coliform Rule Monitoring, Routine Major (TCR) Coliform (TCR) Returned to Compliance
2010-01-01 - 2010-01-31 Miscellaneous Operations Report - Returned to Compliance
2007-01-01 - 2007-01-31 Miscellaneous Operations Report - Returned to Compliance
2006-10-01 - 2006-10-31 Miscellaneous Operations Report - Returned to Compliance
2008-07-01 - N/A Consumer Confidence Rule Consumer Confidence Report Complete Failure to Report Consumer Confidence Rule Returned to Compliance
2008-07-01 - N/A Lead and Copper Rule Follow-up Or Routine LCR Tap M/R Lead and Copper Rule Open

What My Water Data Means


Water data isn't always easy to interpret, but by following the links on this page you should be able to have most of your questions answered. By clicking the name of a water contaminant or secondary substance you can learn about that specific substance. Ultimately this page should give you some insight towards learning if your water is safe, what water filter you should buy (if any), and how well your local water compares against other sources.

Sources


The origin of MyTapWater.org's water data is explained on our Data Sources page.

Why Is My Water Data Not More Recent?


The recency of the data for your ZIP code depends on the last your water source was tested, by a federal, state, or local agency. More information about the timing can be determined by learning about the dataset in question and seeing how often the EPA (other another governing body) mandated testing.