Public Water System: Clark Addition Water System
MyTapWater.org's tap water quality report is the compilation of data collected from federal, state, and local government agencies, most prominently the EPA. We strive to populate the report with the latest data concerning water contaminants, lead and copper levels, and water quality violations. We only collect drinking water data from public water systems.
PWS Service Information
PWS ID: WA53AB809
Type: Community water system
EPA Region: 10
Primary Service Area: Residential Area
Primary Source: Ground water
Population Served: 189
Clark Addition Water System
3904 Ivy Rd
Pasco, WA 99301
This public water system services 6 zip codes in 1 county.
We could not find test result data for Clark Addition Water System.
However, this area is serviced by 143 or more other public water systems. Check your water bill to see which specific system applies. Here is a list of related systems:
- Pasco Water Department
- Connell, City Of
- West Pasco Water System Inc
- Basin City Water Sewer District
- Pasco Flea Market
- Lyons Ferry State Park
- Pasco, Port Of 210
- Flamingo Village Mhp
- Lamb-weston Pasco
- Mesa Water Department
A summary view of the the times a water contaminant was tested and found to exceed the level set by the EPA (the MCL).
We couldn't find any records of contaminants exceeding the regulated limits in your water.
Other Water Contaminants Tested
The following contaminants were tested and within national EPA guidelines.
We couldn't find any records of contaminants in your water.
Lead and Copper Data
Lead and copper are recorded separately from other contaminants because of the Lead and Copper Rule. As with all other results, these are the findings at the water supply. Lead and copper can be — and often are — added to drinking water in between the water facility and a tap.
|Sample ID||Contaminant||Sampling Start Date||Sampling End Date||Result|
Known violations of the Safe Drinking Water Act as recorded by the EPA.
|Compliance Dates||Rule||Violation Type||Contaminant Name||Status|
|2017-07-01 - 2017-07-31||Revised Total Coliform Rule||Monitoring, Routine (RTCR)||Revised Total Coliform Rule||Returned to Compliance|
|2009-01-01 - 2009-12-31||Nitrates||Monitoring, Regular||Nitrate||Returned to Compliance|
|2010-01-01 - N/A||Lead and Copper Rule||Initial Tap Sampling for Pb and Cu||Lead and Copper Rule||Returned to Compliance|
|2010-07-01 - N/A||Lead and Copper Rule||Initial Tap Sampling for Pb and Cu||Lead and Copper Rule||Returned to Compliance|
What My Water Data Means
Water data isn't always easy to interpret, but by following the links on this page you should be able to have most of your questions answered. By clicking the name of a water contaminant or secondary substance you can learn about that specific substance. Ultimately this page should give you some insight towards learning if your water is safe, what water filter you should buy (if any), and how well your local water compares against other sources.
The origin of MyTapWater.org's water data is explained on our Data Sources page.
Why Is My Water Data Not More Recent?
The recency of the data for your ZIP code depends on the last your water source was tested, by a federal, state, or local agency. More information about the timing can be determined by learning about the dataset in question and seeing how often the EPA (other another governing body) mandated testing.