Munroe Falls City Pws Water System

MyTapWater.org's tap water quality report is the compilation of data collected from federal, state, and local government agencies, most prominently the EPA. We strive to populate the report with the latest data concerning water contaminants, lead and copper levels, and water quality violations. We only collect drinking water data from public water systems.

PWS Service Information
PWS ID: OH7702703
Type: Community water system
EPA Region: 05
Primary Service Area: Residential Area
Primary Source: Ground water purchased
Population Served: 5,032
Contact Information
SIMMONS, KRISTINA
SIMMONS, KRISTINA
43 MUNROE FALLS AVE
MUNROE FALLS, OH 44262
[email protected]

This public water system services 1 county.

We could not find test result data for Munroe Falls City Pws.
However, this area is serviced by 900 or more other public water systems. Check your water bill to see which specific system applies. Here is a list of related systems:

See 890 more related public water systems »

Summary Results


A summary view of tests in which a water contaminant found to exceed the Maximum Contaminant Level (MCL) set by the EPA.

We couldn't find any records of contaminants exceeding the regulated limits in your water.

Other Water Contaminants Tested


The following contaminants were tested and found to be within national EPA guidelines.

We couldn't find any records of contaminants in your water.

Lead and Copper Data


Lead and copper are recorded separately from other contaminants because of the Lead and Copper Rule. As with all other results, these are the findings at the water supply level. Lead and copper can be — and often are — deposited in drinking water in between the water facility and your tap.

Sample ID Contaminant Sampling Start Date Sampling End Date Result
OH69522 lead 2019-01-01 2019-12-31 0mg/L
OH67676 lead 2018-01-01 2018-12-31 0mg/L
OH63564 lead 2014-01-01 2016-12-31 0.0019mg/L
OH59044 lead 2011-01-01 2013-12-31 0mg/L
OH54103 lead 2008-01-01 2010-12-31 0.00562mg/L

Violations


Known violations of the Safe Drinking Water Act as recorded by the EPA.

Compliance Dates Rule Violation Type Contaminant Name Status
2016-10-01 - 2016-12-31 Stage 2 Disinfectants and Disinfection Byproducts Rule Monitoring and Reporting (DBP) Total Haloacetic Acids (HAA5) Returned to Compliance
2016-10-01 - 2016-12-31 Stage 2 Disinfectants and Disinfection Byproducts Rule Monitoring and Reporting (DBP) TTHM Returned to Compliance
2008-04-01 - 2009-03-31 Stage 2 Disinfectants and Disinfection Byproducts Rule Monitoring, Routine (IDSE) Total Haloacetic Acids (HAA5) Returned to Compliance
2008-04-01 - 2009-03-31 Stage 2 Disinfectants and Disinfection Byproducts Rule Monitoring, Routine (IDSE) TTHM Returned to Compliance
2009-07-02 - N/A Stage 2 Disinfectants and Disinfection Byproducts Rule Failure Submit IDSE/Subpart V Plan Rpt Stage 2 Disinfectants and Disinfection Byproducts Rule Returned to Compliance

Local Water Testing


Find a lab in your area so you can get your tap or well water tested. This list contains both governmental and private labs, all of which are EPA-certified for drinking water testing.

Lab Location Zip Code
Adams Water Lab, Inc. Akron, OH 44310
Akron WTP Laboratory Akron, OH 44240
Eastern Laboratory Services, LTD. Medina, OH 44256

Water Bill Information


Convenient information about your water service.

Unable to identify any billing information about Munroe Falls City Pws (OH7702703).

What My Water Data Means


Water data isn't always easy to interpret, but by following the links on this page you should be able to have most of your questions answered. By clicking the name of a water contaminant or secondary substance you can learn about that specific substance. Ultimately this page should give you some insight towards learning if your water is safe, what water filter you should buy (if any), and how well your local water compares against other sources.

Sources


The origin of MyTapWater.org's water data is explained on our Data Sources page.

Why Is My Water Data Not More Recent?


The recency of the data for your ZIP code depends on the last your water source was tested, by a federal, state, or local agency. More information about the timing can be determined by learning about the dataset in question and seeing how often the EPA (other another governing body) mandated testing.