Public Water System: Lookout Pass Ski Area
MyTapWater.org's tap water quality report is the compilation of data collected from federal, state, and local government agencies, most prominently the EPA. We strive to populate the report with the latest data concerning water contaminants, lead and copper levels, and water quality violations. We only collect drinking water data from public water systems.
PWS Service Information
PWS ID: ID1400067
Type: Transient non-community system
EPA Region: 10
Primary Source: Groundwater under influence of surface water
Population Served: 600
PO BOX 108
WALLACE, ID 83873
This public water system services 12 zip codes in 1 county.
We could not find test result data for Lookout Pass Ski Area.
However, this area is serviced by 93 or more other public water systems. Check your water bill to see which specific system applies. Here is a list of related systems:
- Central Shoshone County Water Dist
- Central Shoshone Water Dist Kellogg
- E Shoshone County Water Dist Wallace
- Central Shoshone Water Dist Osburn
- Pinehurst Water Dist
- Pinecrest Hills Water System
- E Shoshone County Water Dist Mullan
- Shoshone Medical Center
- Cataldo Water Dist
- Kingston Water Dist 1
A summary view of the the times a water contaminant was tested and found to exceed the level set by the EPA (the MCL).
We couldn't find any records of contaminants exceeding the regulated limits in your water.
Other Water Contaminants Tested
The following contaminants were tested and within national EPA guidelines.
We couldn't find any records of contaminants in your water.
Lead and Copper Data
Lead and copper are recorded separately from other contaminants because of the Lead and Copper Rule. As with all other results, these are the findings at the water supply. Lead and copper can be — and often are — added to drinking water in between the water facility and a tap.
No lead and copper results.
Known violations of the Safe Drinking Water Act as recorded by the EPA.
|Compliance Dates||Rule||Violation Type||Contaminant Name||Status|
|1997-10-01 - 1997-12-31||Total Coliform Rule||Monitoring, Routine Major (TCR)||Coliform (TCR)||Known|
|1996-10-01 - 1996-12-31||Total Coliform Rule||Monitoring, Routine Major (TCR)||Coliform (TCR)||Known|
|1996-04-01 - 1996-06-30||Total Coliform Rule||Maximum Contaminant Level Violation, Monthly (TCR)||Coliform (TCR)||Known|
|1996-01-01 - 1996-03-31||Total Coliform Rule||Monitoring, Routine Major (TCR)||Coliform (TCR)||Known|
|1994-01-01 - 1994-03-31||Total Coliform Rule||Monitoring, Routine Major (TCR)||Coliform (TCR)||Known|
|1993-02-01 - 1993-02-28||Total Coliform Rule||Monitoring, Routine Major (TCR)||Coliform (TCR)||Known|
|1991-03-01 - 1991-03-31||Total Coliform Rule||Maximum Contaminant Level Violation, Monthly (TCR)||Coliform (TCR)||Known|
|1991-01-01 - 1991-03-31||Total Coliform Rule||Maximum Contaminant Level Violation, Monthly (TCR)||Coliform (TCR)||Known|
What My Water Data Means
Water data isn't always easy to interpret, but by following the links on this page you should be able to have most of your questions answered. By clicking the name of a water contaminant or secondary substance you can learn about that specific substance. Ultimately this page should give you some insight towards learning if your water is safe, what water filter you should buy (if any), and how well your local water compares against other sources.
The origin of MyTapWater.org's water data is explained on our Data Sources page.
Why Is My Water Data Not More Recent?
The recency of the data for your ZIP code depends on the last your water source was tested, by a federal, state, or local agency. More information about the timing can be determined by learning about the dataset in question and seeing how often the EPA (other another governing body) mandated testing.