Slater Muni Water Dept Water System

MyTapWater.org's tap water quality report is the compilation of data collected from federal, state, and local government agencies, most prominently the EPA. We strive to populate the report with the latest data concerning water contaminants, lead and copper levels, and water quality violations. We only collect drinking water data from public water systems.

PWS Service Information
PWS ID: IA8580057
Type: Community water system
EPA Region: 07
Primary Service Area: Municipality
Primary Source: Purchased ground water under influence of surface water source
Population Served: 1,489
Contact Information
SLATER MUNI WATER DEPT
SLATER MUNI WATER DEPT
ATTN WATER SUPERINTENDENT
101 STORY ST
SLATER, IA 50244
[email protected]

This public water system services 1 municipality in 1 county.

We could not find test result data for Slater Muni Water Dept.
However, this area is serviced by 70 or more other public water systems. Check your water bill to see which specific system applies. Here is a list of related systems:

See 60 more related public water systems »

Summary Results


A summary view of tests in which a water contaminant found to exceed the Maximum Contaminant Level (MCL) set by the EPA.

We couldn't find any records of contaminants exceeding the regulated limits in your water.

Other Water Contaminants Tested


The following contaminants were tested and found to be within national EPA guidelines.

We couldn't find any records of contaminants in your water.

Lead and Copper Data


Lead and copper are recorded separately from other contaminants because of the Lead and Copper Rule. As with all other results, these are the findings at the water supply level. Lead and copper can be — and often are — deposited in drinking water in between the water facility and your tap.

Sample ID Contaminant Sampling Start Date Sampling End Date Result
IA44663 lead 2019-01-01 2019-06-30 0.002mg/L
IA44549 copper 2019-01-01 2019-06-30 1.37mg/L
IA44498 lead 2018-07-01 2018-12-31 0.0021mg/L
IA44461 copper 2018-07-01 2018-12-31 1.75mg/L
IA43427 lead 2018-01-01 2018-06-30 0.0023mg/L
IA43420 copper 2018-01-01 2018-06-30 1.46mg/L
IA42647 lead 2017-07-01 2017-12-31 0.0022mg/L
IA42505 copper 2017-07-01 2017-12-31 1.37mg/L
IA42366 lead 2015-01-01 2015-12-31 0.0036mg/L
IA39791 lead 2014-01-01 2014-12-31 0.0118mg/L
IA39530 lead 2013-01-01 2013-12-31 0.0041mg/L
IA38927 lead 2012-01-01 2012-06-30 0mg/L
IA37518 lead 2011-07-01 2011-12-31 0.00322mg/L
IA36474 lead 2010-01-01 2010-06-30 0.0039mg/L
IA35974 copper 2010-01-01 2010-06-30 1.9mg/L
IA35760 lead 2009-07-01 2009-12-31 0.00262mg/L
IA35260 copper 2009-07-01 2009-12-31 1.62mg/L
IA35409 lead 2009-01-01 2009-06-30 0.00656mg/L
IA34909 copper 2009-01-01 2009-06-30 2.56mg/L
IA34317 copper 2006-01-01 2008-12-31 3.21mg/L
IA34817 lead 2006-01-01 2008-12-31 0.00697mg/L

Violations


Known violations of the Safe Drinking Water Act as recorded by the EPA.

Compliance Dates Rule Violation Type Contaminant Name Status
2008-12-01 - 2008-12-31 Nitrates Monitoring, Regular Nitrite Returned to Compliance
2006-10-01 - 2007-09-30 Nitrates Monitoring, Regular Nitrate Returned to Compliance
2000-01-01 - 2000-12-31 Nitrates Monitoring, Regular Nitrate Returned to Compliance
- N/A Radionuclides Monitoring, Regular Gross Alpha, Excl. Radon and U Returned to Compliance
- N/A Total Coliform Rule Maximum Contaminant Level Violation, Acute (TCR) Coliform (TCR) Returned to Compliance

Local Water Testing


Find a lab in your area so you can get your tap or well water tested. This list contains both governmental and private labs, all of which are EPA-certified for drinking water testing.

Unable to identify any nearby water testing labs near 50244.

Water Bill Information


Convenient information about your water service.

Unable to identify any billing information about Slater Muni Water Dept (IA8580057).

What My Water Data Means


Water data isn't always easy to interpret, but by following the links on this page you should be able to have most of your questions answered. By clicking the name of a water contaminant or secondary substance you can learn about that specific substance. Ultimately this page should give you some insight towards learning if your water is safe, what water filter you should buy (if any), and how well your local water compares against other sources.

Sources


The origin of MyTapWater.org's water data is explained on our Data Sources page.

Why Is My Water Data Not More Recent?


The recency of the data for your ZIP code depends on the last your water source was tested, by a federal, state, or local agency. More information about the timing can be determined by learning about the dataset in question and seeing how often the EPA (other another governing body) mandated testing.